Asphalt tile based on basic material source can be divided into three kinds, respectively is the road asphalt, asphalt, modified asphalt oxidation. Road asphalt melting point is low, the oil is heavy, volatile, low cost, good viscosity, used for asphalt road asphalt oxidation configuration, also known as 10 asphalt, temperature resistant performance is good, is not easy to volatilize, also known as the solid bitumen, good ageing resistance, long using time, modified asphalt for waterproofing.

Asphalt tile is also called the colorful asphalt shingles, is made of natural sand, or natural rock asphalt materials in direct crushing, processing, color natural, close, permanent color retention, colour is beautiful.

Laying asphalt shingles, need to order are laid along the edge of the cornice, gable and the same initial layer of asphalt shingles of the first layer of asphalt tile relatively homogeneous, asphalt tile laying the necessary precision, but can not produce extruded tile, the laying of the first layer is the key, in the process of laying unnecessary stop check drain if the horizontal line of the required tiles and the side alignment, first piece of asphalt two layer tile should be the same front layer of asphalt tile side staggered half leaf. Followed by three layers of asphalt tile laying, the first should be going across the leaf cut loss, make it with second layers of asphalt tile first stagger, and the bottom asphalt shingles should be with the second layer of asphalt tile decorative seam roof looked at flush.